Resources

Envelopes with special design elements such as bleeds, tight registration, heavy coverage, embossing or foil stamping, or use of a paper not readily available as a pre-made envelope, can be printed on a flat sheet and then converted into a finished envelope.

Design considerations:

• Extend bleed edges 1/8”.
• There may be some variance at the bleed edge due to converting tolerances.
• Special envelope sizes or flaps require custom dies.
• No ink on glue areas.
• Heavy ink coverage requires a varnish or aqueous coating to avoid marring during the converting process.
• Standard production time for the converting process is five working days.
• Converted envelopes are more cost-effective in larger quantities.

MGTL will provide a folded, glued mockup of a digital proof for your approval prior to printing.